Pengaruh Fraksi Volume Komposit Serat Kersen Terhadap Kekuatan Tarik Dan Impact Dengan Matriks Polyester

  • Awal Ziban Wilantara Politeknik Manufaktur Negeri Bangka Belitung
Keywords: Composite, Kersen Fiber, Volume Fraction, Tensile Test-Impact Test

Abstract

This study aims to determine how the volume fraction variation of cherry fiber affects the tensile strength and impact strength by using Polyester Resin and using the Experimental composite molding method. The object of research is cherry fiber composites with volume fraction variations. The highest tensile strength in the composite with a volume fraction variation of 5% cherry fiber and 98% polyester resin is 21.23 Mpa. As for the value of the lowest tensile strength in the composite with a volume fraction variation of 3% cherry fiber and 97% resin, which is 13.50 Mpa. For testing the impact of the highest strength value by using a volume fraction variation of 2% cherry fiber and 98% polyester resin, which is 0.7893 J/mm². As for the value of the lowest impact strength on the composite with a volume fraction variation of 3% cherry fiber and 97% polyester resin, which is 0.4705 J/mm².

Downloads

Download data is not yet available.

References

Defi Tri Wahyudi & Tri Hartutuk Ningsih,(2018) PENGARUH FRAKSI VOLUME SERAT KERSEN TERHADAP KEKUATAN TEKUK DAN TARIK KOMPOSIT DENGAN MATRIK EPOKSI. Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Srubaya. 7-14).http://ejournal.unesa.ac.id
Muhammad Agung Luthfinandha & Novi Sukms Drastiawati,(2020) PENGARUH WAKTU PERENDAMAN SERAT PADA LARUTAN NATRIUM BUKARBONAT (NaHCO3) TERHADAP KEKUATAN TARIK DAN STRUKTUR MIKRO KOMPOSIT SERAT KULIT BATANG KERSEN-POLIESTER.Jurusan Teknik Mesin, Fakultas Teknik, Universitas Negeri Surabaya. 9-18). https://ejournal.unesa.ac.id
Indrayanto, Ari (2018) Pengaruh Waktu Perendaman Serat Pohon Kersen (Muntingia calabura) Pada Larutan NaOH Terhadap kekuatan Tarik Komposit Dengan Matrix Epoxy. Sarjana thesis, Universitas Brawijaya.http://repository.ub.ac.id
Tri Hartutuk Ningsih, Deni Hardiansyah Tangahu, Defi Tri wahyudi, (2019) Optimasi Fraksi Volume Komposit Serat Kersen Terhadap Kekuatan Tarik. Jurnal Rekayasa Material, Manufaktur dan Energi 2 (2), 140-149).http://junal.umsu.ac.id
Published
2022-01-10
How to Cite
Ziban Wilantara, A. (2022). Pengaruh Fraksi Volume Komposit Serat Kersen Terhadap Kekuatan Tarik Dan Impact Dengan Matriks Polyester. Eduscotech, 3(1). Retrieved from https://journal.udn.ac.id/index.php/eduscotech/article/view/105
Issue
Vol. 3 No. 1
Section
Articles

Authors who publish with this journal agree to the following terms: 
1. Copyright on any article is retained by the author(s).
2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work’s authorship and initial publication in this journal. 
3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License